Grey Man Tactical 9.25 x 15 Rigid Molle Panel Black GMT-RMP-08

Description

You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods. Use Velcro one wrap or Grimloc. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to. Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond. When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes. For any backpack without internal MOLLE webbing: Hydration Bladder Loop - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. This promotes higher adhesion to the panel. Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. For backpacks with Internal Velcro Loop: - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. Ensure the panel is cleaned with an alcohol wipe and completely dry. Adhesive backed Velcro To adhere the Adhesive backed Velcro Hook tape to your RMP panel: - Ensure the panel is cleaned with an alcohol wipe and completely dry.

Key Features

• Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place.
• Grommet / Chicago - Punch a hole in the fabric and secure a grommet to prevent ripping.
• Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to.
• Use a chicago screw to secure the panel to the grommet.
• Product Specifications Width: 9.25" (234.95mm) Height: 15" (381mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 9.5 ounces (269.32 grams) Backpack Compatibility The 9.25in x 15in RMP Backpack Insert fits:- 5.11.