Awlgrip Polyester Urethane Topcoat Base - Snow White High Gloss - Quart G8044

Description

Spray Applications: Apply a light, smooth, slightly wet tack coat to the surface. Reduce up to 25% with spray reducers appropriate for conditions. On large surfaces such as hull sides, transoms, and house sides, first roll the Awlgrip Topcoat and then smooth the roller stipple b. Clear coats, metallic colors, and painting in high temperatures may require additional reduction. 25% reduction is a standard mix. Brush/roller applications require two coats. Mixing and Reduction Spray Mix one part Topcoat Base Component with one part Awl Cat #2 G3010 spray converter to a smooth, homogenous mixture. Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended. Sanding between coats with 280 to 400 grit paper will provide a smoother finish. Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat. Regardless of application method 2 coats is the minimum. If preferred, 3 coats may be used. Surface Preparation Awlgrip colors should be applied over properly prepared 545 primer or in brush/roller applications Awl-Quik primer. With its superior resistance to sun, saltwater, chemicals and abrasion, Awlgrip is ideal for coating everything from topsides, cabin tops, decks and masts to engines. Allow 16 hrs between each coat. Topcoating cannot be done in one coat. Roller/Brush Mix 2 parts Awlgrip Topcoat Base Component with one part Awl Cat #3/H3002 brushing converter until one smooth homogenous mixture is obtained.

Key Features

• Awlgrip provides a durable high gloss finish to wood, fiberglass, aluminum or steel and can be applied with a roller, brush or spray gun.
• Sanding between coats with 280 to 400 grit paper will provide a smoother finish.
• Long lasting; high gloss resistance to sun, saltwater, chemicals and abrasion Appropriate for use on fiberglass, steel and wood Low maintenance Above the waterline use only Available in quarts and gallons Custom colors available ***.
• Allow second coat to "flash off" 30 to 45 minutes until only slightly tacky before applying third coat.
• Do not apply 3005 over white or pastel colors, or to bare wood.
• Allow tack coat to "flash off" 30 to 45 minutes.