Awlgrip G8010Q; Off-White (Lf)-Quart

Description

Do not apply G3005 over white or pastel colors. Spray application: Apply a light, smooth, slightly wet tack coat to the surface. Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat. For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz. Reduce 10-33% with T0031. Brush/Roller applications require at least two coats. Do not apply G3005 directly to bare wood. Using a contrasting mist coat of lacquer primer as a "guide coat" is recommended. Awlgrip colors may also be applied over recently applied Awlgrip topcoats/showcoats – consult your local Technical Sales Representative for advice. Spray applying certain colors may require 4 or more coats to obtain full hide (opacity) or color coverage. G3010, 4 oz. Coats two and three are not "full, wet" coats. For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz. Overall mix is 2:1:⅓-1 by volume (8 oz. However, over time, a build up of. Allow tack coat to "flash off" 15 to 45 minutes. Maintenance It is difficult for dirt grime and grease to adhere to an Awlgrip, Awlcraft 2000 or Awlgrip HS Topcoat. Surface Preparation For best results AWLGRIP colors should be applied over properly prepared 545 Epoxy Primer, 345 HS Primer or in brush/roller applications Awlquik Primer. Achieving maximum gloss and distinction of image requires the primer to be smooth sanded with 280-400 grit paper before topcoat application. H3002, 1.3- 4 oz.

Key Features

• Do not apply G3005 directly to bare wood.
• Sanding between coats with 320-400 grit paper will provide a smoother finish.
• For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz.
• Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat.
• Allow tack coat to "flash off" 15 to 45 minutes.
• Overall mix is 2:1:⅓-1 by volume (8 oz.